Summary
Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.
The primary purpose of this position is to perform calibration and certification of electrical, electronic, and physical/dimensional Test, Measurement, and Diagnostic Equipment (TMDE).
This job is open to

• Federal employees - Competitive service
  Current or former competitive service federal employees.
• Federal employees - Excepted service
  Current excepted service federal employees.
• Career transition (CTAP, ICTAP, RPL)
  Federal employees who meet the definition of a "surplus" or "displaced" employee.
• Veterans
• Military spouses
• Land and base management
  Certain current or former term or temporary federal employees of a land or base management agency.

Clarification from the agency
Eligible NAF employees are considered under Hiring Path - "Federal employees-Excepted service"
Duties

• Adjust, calibrate, certify, troubleshoot & repair a wide variety of electrical, electronic, physical, and dimensional TMDE, to include electrical, electronic, and physical/dimensional Laboratory Standards, Base Reference Standards and unusually complex multifunctional and/or interrelated TMDE, instruments and instrumentation systems, in any measurement area of the PMEL.
• Coordinate efforts with technical and professional personnel on matters affecting equipment performance, test objectives, and calibration/certification reliability and effectiveness.
• Maintains records and documents actions.
• Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe, clean and secure work environment.

Requirements
Conditions of Employment

• U.S. Citizenship Required
• Males must be registered for Selective Service, see
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• May be required to work rotating shifts or uncommon tours of duty. Incumbent is subject to call back to meet emergency situations
• May be required to possess a valid operator's license to drive a motor vehicle to and from work sites
• Must be able to obtain and maintain a Secret Clearance
• May be detailed to other areas and/or duties, as the mission requires
• Will be required to obtain and maintain qualifications equivalent to 7-skill level, in accordance with the flight's Master Training Plan and other established training requirements
• Will be required to successfully complete the Air Force Trainer's Course
• Will be required to obtain and maintain qualifications necessary to possess a TMDE Certification Stamp, commonly referred to as a "K-stamp", in accordance with applicable directives

Qualifications
In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG 3378 PRECISION MEASUREMENT EQUIPMENT CALIBRATOR position. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of a PRECISION MEASUREMENT EQUIPMENT CALIBRATOR without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Ability to apply knowledge of metrology (measurement science), mathematics, physics, electronics, circuit analysis using schematics, diagrams, detailed drawings and computer automation routines to adjust, calibrate and certify complex TMDE.
2. Understand and predict the progressive effects of uncertainties throughout the interrelated units; trace the effect of a change in one subsystem on other subsystems and determine which controls and devices must be adjusted to compensate; apply test uncertainty ratio calculations to determine suitability of calibration standards or to determine adequacy of substitute standard.
3. Ability to analyze and troubleshoot interface problems between instruments, instrument controllers and sensors in complex test and measurement systems; skill in tracing signals and voltage paths and in the analysis of waveform characteristics such as timing, duration, frequency, and phasing; analyze test set-ups to isolate malfunctions and check performance characteristics of special or one of a kind test set ups; ability to use a variety of hand and power tools to accomplish incidental repairs.
4. Ability to work closely with others, and to communicate effectively, both verbally and in writing; ability to effectively train other personnel in accordance with established training guidelines.
5. Ability to document the calibration process; accurately prepare and affix calibration labels and note "as found" & "as returned" condition; identify "Out of Tolerance" conditions and the extent of deviations encountered during the calibration process; ability to understand and document measurement uncertainty in accordance with national and international standards.
6. Knowledge of safety regulations, procedures, and security requirements. Skill in using and maintaining hand tools and power tools, such as drills, chassis punches, wrenches, soldering irons and micro-soldering units to remove and replace circuit parts.

PHYSICAL EFFORT: Frequently lifts and carries, unassisted, items weighing up to 50 pounds. Sometimes required to lift and carry items weighing more than 50 pounds with the help of weight handling equipment or with assistance from other workers. The work requires working in a sitting position for extended periods of time, and frequent standing, walking, bending, crouching, reaching, and stooping are required. Some work may require the aid of magnifying lenses, eye loops, or other devices to accomplish repairs on miniature components.
WORKING CONDITIONS: Employee typically works in well-lighted, heated, and ventilated areas. May be required to work in environments where special garments including head coverings, shoe coverings, gloves, and/or coveralls are required. May be required to work at remote user locations under variable conditions. Exposed to high pressure systems, periodic hazardous noise levels, and the possibility of cuts & bruises, electric shock, burns from electrical or RF energy or hot solder and minor cuts or bruises.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.
If you have questions regarding this announcement and have hearing or speech difficulties click here

• Benefits
  A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
  Review our benefits
  Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
BASIS OF RATING: Your application will be rated under the Cut Point procedures based on the extent to which the quality, depth, and complexity of your experience relates to the qualification requirements. Additional points are not added for Veteran's Preference; however, Veteran's Preference is considered where applicable.
Best Qualified Group: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements.
Fully Qualified Group: Candidates in this category possess good skills and experience above the minimum requirements.
Basically Qualified Group: Candidates in this category meet the minimum experience requirements.
The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.
All Federal Wage Schedule (FWS) applicants must complete the assessment questionnaire in its entirety or it will result in an ineligible rating. Applicants who meet the requirements for and apply as a non-competitive eligible that meet minimal qualifications and other requirements of this position, will be given consideration as a non-competitive candidate and will be referred unless blocked by an individual with priority/preference.
APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

• Benefits
  A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
  Review our benefits
  Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
• Required Documents
  As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
  The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
  1. Online Application: Questionnaire
  2. Resume: For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
  3. Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
  4. Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15 form.
  5. Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
  ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
  
  • Name/Rank/Grade of Service Member
  • Branch of Armed Forces
  • Dates of Active Service (Start and End Date(s)
  • Expected Date of Discharge/Release from Active Duty
  • Terminal leave start date (if applicable)
  • Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
  • Must be certified within 120 days of anticipated discharge
  • Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
  Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.
  OPTIONAL DOCUMENTS:
  Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.
  Awards for Current Federal Civilian Employees - List any awards received within the last 3 years on the resume.
  Note: Applicant must not submit award Notification of Personnel Actions (SF50s).
• How to Apply
  The complete Application Package must be submitted by 11:59 PM (ET) on 01/27/2025
  To preview the Application Questionnaire, please click the following link:
  To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the application questionnaire. Please ensure you click the Submit My Application button at the end of the process.
  To apply for this position, you must provide a complete Application Package which includes:
  1. Your Resume (your latest resume will be used to determine your qualifications). If you submit more than one copy of your resume, only the most recent (latest) version will be reviewed. The latest timestamp will be used to determine which version of your resume is "most recent."
  • It is your responsibility to check the status and timestamp of all documents you submit as part of your application.
  • If your resume includes a photograph or other inappropriate material or content, you will not be considered for this vacancy.
  • For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., hours per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position.
  2. A complete Application Questionnaire
  3. Additional Required Documents (see Required Documents section). Ensure all submitted documents contain your full name.
  PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resume) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully. You can access your USAJOBS account to do so by clicking here. Uploaded documents may take up to one hour to clear the virus scan.
  Human Resources WILL NOT modify or change any answers submitted by an applicant.
  Agency contact information
  Total Force Service Center
  Phone
  1-800-525-0102
  Email
  
  Address
  Kirtland AFB
  1551 Wyoming Blvd SE
  Bldg 20325
  Kirtland AFB, NM 87117
  US
  Next steps
  Once your application package is received an acknowledgement email will be sent.
  If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility and qualifications for consideration. If you are determined to be ineligible or not qualified, your application will receive no further consideration.
  To check the status of your application or return to a previous or incomplete application, log into your USAJOBS account, select My Applications, and click on the more information link under the application status for this position.
  If you do not provide an email address, you are responsible for checking status updates and notifications in USAJOBS. Hard copy notifications will not be sent to you.
• Fair and Transparent
  The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
  • Criminal history inquiries
  • Equal Employment Opportunity (EEO) Policy
  • Financial suitability
  • New employee probationary period
  • Privacy Act
  • Reasonable accommodation policy
  • Selective Service
  • Signature and false statements
  • Social security number request

Required Documents
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.

1. Online Application: Questionnaire
2. Resume: For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
3. Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
4. Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15 form.
5. Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".

ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:

• Name/Rank/Grade of Service Member
• Branch of Armed Forces
• Dates of Active Service (Start and End Date(s)
• Expected Date of Discharge/Release from Active Duty
• Terminal leave start date (if applicable)
• Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
• Must be certified within 120 days of anticipated discharge
• Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.

Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.
OPTIONAL DOCUMENTS:
Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.
Awards for Current Federal Civilian Employees - List any awards received within the last 3 years on the resume.
Note: Applicant must not submit award Notification of Personnel Actions (SF50s).
How to Apply
The complete Application Package must be submitted by 11:59 PM (ET) on 01/27/2025
To preview the Application Questionnaire, please click the following link:
To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the application questionnaire. Please ensure you click the Submit My Application button at the end of the process.
To apply for this position, you must provide a complete Application Package which includes:
1. Your Resume (your latest resume will be used to determine your qualifications). If you submit more than one copy of your resume, only the most recent (latest) version will be reviewed. The latest timestamp will be used to determine which version of your resume is "most recent."

• It is your responsibility to check the status and timestamp of all documents you submit as part of your application.
• If your resume includes a photograph or other inappropriate material or content, you will not be considered for this vacancy.
• For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., hours per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position.

2. A complete Application Questionnaire
3. Additional Required Documents (see Required Documents section). Ensure all submitted documents contain your full name.
PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resume) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully. You can access your USAJOBS account to do so by clicking here. Uploaded documents may take up to one hour to clear the virus scan.
Human Resources WILL NOT modify or change any answers submitted by an applicant.
Agency contact information
Total Force Service Center
Phone
1-800-525-0102
Email

Address
Kirtland AFB
1551 Wyoming Blvd SE
Bldg 20325
Kirtland AFB, NM 87117
US
Next steps
Once your application package is received an acknowledgement email will be sent.
If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility and qualifications for consideration. If you are determined to be ineligible or not qualified, your application will receive no further consideration.
To check the status of your application or return to a previous or incomplete application, log into your USAJOBS account, select My Applications, and click on the more information link under the application status for this position.
If you do not provide an email address, you are responsible for checking status updates and notifications in USAJOBS. Hard copy notifications will not be sent to you.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.

• Criminal history inquiries
• Equal Employment Opportunity (EEO) Policy
• Financial suitability
• New employee probationary period
• Privacy Act
• Reasonable accommodation policy
• Selective Service
• Signature and false statements
• Social security number request